Allied Telesis AR2050V, Справочник по командам, Страница: 1426 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 1426
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
OLICY
-
BASED
R
OUTING
C
OMMANDS
IPV
6
POLICY
-
ROUTE
Before creating a policy route, you need to create the application and entities that
specify the traffic you want to route. To create an application, use the
application
command. To create entities, use the zone , network (Entity) , and host (Entity)
commands. To see existing applications and entities, use the show application and
show entity commands.
Examples To create a policy route to route traffic that matches an application called “voice”,
comes from the entity called “inside”, and is destined for the entity called “outside”,
use the following commands:
awplus# configure terminal
awplus(config)# policy-based-routing
awplus(config-pbr)# policy-based-routing enable
awplus(config-pbr)# ipv6 policy-route 10 match voice from
inside to outside nexthop 2001:100::1
To delete the policy route created above, use the following commands:
awplus# configure terminal
awplus(config)# policy-based-routing
awplus(config-pbr)# no ipv6 policy-route 10
To route the above traffic via ppp0 if ppp0 is up, or ppp1 if ppp0 is down, use the
following commands:
awplus# configure terminal
awplus(config)# policy-based-routing
awplus(config-pbr)# policy-based-routing enable
awplus(config-pbr)# ipv6 policy-route 20 match voice from
inside to outside nexthop ppp0 ppp1
To delete the policy route created above, use the following commands:
awplus# configure terminal
awplus(config)# policy-based-routing
awplus(config-pbr)# no ipv6 policy-route 20
Related
Commands
policy-based-routing
policy-based-routing enable
show application
show entity
show ipv6 pbr route