Allied Telesis AR2050V, Справочник по командам, Страница: 1298 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 1298
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
BGP
AND
BGP4+ C
OMMANDS
NEIGHBOR VERSION
(BGP
ONLY
)
neighbor version (BGP only)
Overview Use this command to configure the device to accept only a particular BGP version.
Use the no variant of this command to use the default BGP version (version 4).
Syntax
neighbor < neighborid > version < version >
no neighbor < neighborid > version
Mode Router Configuration or IPv4 Address Family Configuration
Usage By default, the system uses BGP version 4 and on request dynamically negotiates
down to version 2. Using this command disables the router’s version-negotiation
capability and forces the router to use only a specified version with the neighbor.
Parameter Description
<neighborid> { <ip-address> | <peer-group> }
<ip-address>
The address of an IPv4 BGP neighbor, in dotted
decimal notation A.B.C.D.
<peer-group>
Enter the name of an existing peer-group. For
information on how to create peer groups,
refer to the
neighbor peer-group (add a
neighbor) command, and neighbor route-map
command. When this parameter is used with
this command, the command applies on all
peers in the specified group.
<version>
{4} Specifies the BGP version number.