Allied Telesis AR2050V, Справочник по командам, Страница: 2600 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 2600
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
IREWALL
C
OMMANDS
DEBUG FIREWALL
debug firewall
Overview Use this command to enable firewall debugging and Network Address Translation
(NAT) debugging. This will cause additional detailed debugging information to be
logged at the “informational” and “debugging” levels.
Use the no variant of this command to disable firewall debugging and NAT
debugging.
For more information about NAT, see the Firewall_and Network Address
Translation (NAT) Feature Overview and Configuration_Guide .
Syntax
debug firewall
no debug firewall
Default Firewall debugging and NAT debugging are disabled by default.
Mode Privileged Exec
Examples To enable firewall debugging and NAT debugging, use the command:
awplus# debug firewall
To disable firewall debugging and NAT debugging, use the command:
awplus# no debug firewall
Validation
commands
show debugging firewall