C613-50186-01 Rev B
Command Reference for AR2050V
1796
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
T
RAFFIC
C
ONTROL
C
OMMANDS
SHOW
TRAFFIC
-
CONTROL
RULE
show traffic-control rule
Overview
Use this command to show specific rules or a complete list of rules configured for
traffic control.
Syntax
show traffic-control rule [
<1-65535>
]
Default
None
Mode
Privileged Exec
Usage
An asterisk will be printed at the start of a row if the rule is invalid. The rules are
shown in a table showing the rule ID, the application, source and destination that
the rule matches on and the policy and class that the matching traffic will be sent
to.
Examples
To show a list of all traffic control rules configured, use the command:
awplus#
show traffic-control rule
To show traffic control rule 10 configured, use the command:
awplus#
show traffic-control rule 10
Output
Figure 38-9:
Example output from
show traffic-control rule
Related
Commands
show running-config traffic-control
show traffic-control rule config-check
Parameter
Description
<1-65535>
The ID of the rule you want to display. If no ID is entered, all rules
are displayed.
awplus#show traffic-control rule
[* - Rule is not valid - see "show traffic-control rule config-check"]
ID APP From To Policy
----------------------------------------------------------------------
10 udp-5001 ipv6.vlan3 ipv6.eth2 A.B5001
20 udp-5002 ipv6.vlan3 ipv6.eth2 A.B5002
* 30 aserf asdf fasdf sadf.asdf