Allied Telesis AR2050V, Справочник по командам, Страница: 242 / 2824

C613-50186-01 Rev B Command Reference for AR2050V 242
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
S
YSTEM
C
ONFIGURATION AND
M
ONITORING
C
OMMANDS
SHOW INTERFACE MEMORY
show interface memory
Overview This command displays the shared memory used by either all interfaces, or the
specified interface or interfaces. The output is useful for diagnostic purposes by
Allied Telesis authorized service personnel.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Syntax show interface memory
show interface < port-list > memory
Mode User Exec and Privileged Exec
Example To display the shared memory used by all interfaces, use the command:
awplus# show interface memory
To display the shared memory used by port1.0.1 and port1.0.5 to port1.0.6, use the
command:
awplus# show interface port1.0.1,port1.0.5-1.0.6 memory
Output Figure 6-5: Example output from the show interface memory command
Parameter Description
<port-list>
Display information about only the specified port or ports. The port
list can be:
• an Eth (e.g. eth1) or switch port (e.g. port1.0.4), a static channel
group (e.g. sa2) or a dynamic (LACP) channel group (e.g. po2)
• a continuous range of ports separated by a hyphen (e.g.
port1.0.1-1.0.4, or sa1-2, or po1-2)
• a comma-separated list of ports and port ranges (e.g.
port1.0.1,port1.0.4-1.0.6). Do not mix port types in the same list.
awplus#show interface memory

Vlan blocking state shared memory usage

---------------------------------------------

Interface shmid Bytes Used nattch Status

port1.0.1 294921 512 1

port1.0.2 491535 512 1

port1.0.3 458766 512 1

port1.0.4 524304 512 1

port1.0.5 425997 512 1

port1.0.6 589842 512 1

port1.0.7 557073 512 1

port1.0.8 622611 512 1

eth2 327690 512 1

eth1 393228 512 1

lo 360459 512 1