Agilent Technologies 53220A, Руководство пользователя

Страница: 160 / 294

160 53220A/53230A User’s Guide
5 Triggering and Gating
Setting the Gate Time
A measurement gate time can be specified directly with the command:
[SENSe:]FREQuency:GATE:TIME {<time>|MINimum|MAXimum|
DEFault}
[SENSe:]FREQuency:GATE:TIME? {MINimum|MAXimum|DEFault}
(query form)
CONFigure
and
MEASure
automatically set the gate source to
TIME,
and the
gate time according to their optional expected value and resolution parame-
ters. Specifying these parameters or using default values with these com-
mands simplifies counter programming. However, setting/changing the gate
time separate from the
CONFigure
/
MEASure
command allows you to change
only the gate time while preserving other configuration settings.
Querying the Gate Time
The gate time set by the expected value and resolu-
tion parameters can be determined after execution of the
CONFigure
or
MEASure
command.
For example, assume a measurement requiring 10-digit (mHz) resolution of a
5 MHz signal is required. Because digits of resolution is approximately equal
to
Log
10
( expected value ) -
Log
10
( resolution ), this measurement could be
configured as:
MEAS:FREQ? 5e6, 5E-4, (@1) // expected freq, resolution
A typical measurement using this configuration might return:
+4.99998458006