ABB ACS880-01 Series, Инструкции к прошивке

Страница: 320 / 664

320 Parameters
33.42 Edge counter 2
function Configures signal edge counter 2. 0000b
0000b…1111b Edge counter 2 configuration word. 1 = 1
33.43 Edge counter 2
source Selects the signal to be monitored by signal edge counter 2. False
False 0. 0
True 1. 1
RO1 Bit 0 of 10.21 RO status (page 188 ). 2
Other [bit] Source selection (see Terms and abbreviations on page 148 ). -
33.44 Edge counter 2
divider Defines a divisor for signal edge counter 2. Determines how
many signal edges increment the counter by 1. 1
1…4294967295 Divisor for signal edge counter 2. -
33.45 Edge counter 2
warn message Selects the optional warning message for signal edge counter
2. Edge counter
2 exceeded
Edge counter 2
exceeded A889 Edge counter 2 . The message text can be edited on the
control panel by choosing Menu – Settings – Edit texts.
3
Counted main
contactor A884 Main contactor . 11
Counted output
relay A881 Output relay . 12
Counted motor
starts A882 Motor starts . 13
Counted power ups A883 Power ups . 14
Counted DC
charges A885 DC charge . 15
No. Name/Value Description Def / FbEq16
Bit Function
0 Counter mode
0 = Loop: When the limit is reached, the counter is reset. The counter status (bit 3 of
33.01 ) remains 1 until the counter is again incremented. The warning (if enabled) stays
active for at least 10 seconds.
1 = Saturate: After the limit is reached, the counter status (bit 3 of
33.01 ) remains 1 until
33.40 is reset. The warning (if enabled) also stays active until 33.40 is reset.
1 Warning enable
0 = Disable: No warning is given when the limit is reached
1 = Enable: A warning (see
33.45 ) is given when the limit is reached
2 Count rising edges
0 = Disable: Rising edges are not counted
1 = Enable: Rising edges are counted
3 Count falling edges
0 = Disable: Falling edges are not counted
1 = Enable: Falling edges are counted
4…15 Reserved