Operating IntegratorRD Workstations
88
show the subscriber IDs with iDEN-specific buttons so calls can be made from this
window instead of the iDEN Call submenu.
iDEN Call Submenu
An iDEN Call submenu is available with the submenu buttons on the right hand side of the
main screen. This submenu replaces the bottom two rows of the IntegratorRD buttons with
a list of the programmed iDEN subscribers and all the iDEN-specific control buttons.
If the configuration is programmed for multiple groups of iDEN radios (up to 10 groups),
a screen similar to
is displayed. Selecting one of these group buttons displays a
set of related iDEN Subscriber IDs as shown in
. If more than 12 IDs are
programmed for the group selected, the IDs can be navigated using the “Next” and/or
“Prev” buttons. At any point, using the “Back (Grps)” button returns the user to the main
screen showing the Radio groups.
If no iDEN radio groups are programmed, all the radio IDs (8 per screen with “Next” and/
or “Prev” buttons to navigate) are displayed on the main screen as shown in
.
Figure 15: iDEN Call Submenu, iDEN Radio groups
Summary of Contents for 4000 Sereis
