129
Operation
Dynamic Regrouping (M427 Port)
In addition to supporting dynamic regrouping of a field radio, the M427 Dispatcher Ports
may also reassign its own 16 dynamic groups (termed “self-regrouping”). In this case, you
highlight the Dispatcher Port channel and click
DynGrp Select
(available in the “MAP27
Call” submenu or Subscriber List window). Please note that, NO ID should be entered
before this operation. This is how the console program knows that a self-dynamic regroup
is required instead of a field radio regroup. At this point you may either click
Clear
DynGrps
to clear all sixteen dynamic group slots, or assign from 1 to 16 slots by selecting
a preprogrammed group button, or entering valid group IDs (comma-separated), then
clicking
Send DynGrp
. In both cases, the channel box displays a message indicating
success or failure of the operation.
shows channel box status messages that are new to the M427 Dispatcher Port
operation.
Table 14: M427 Dispatcher Operation Progress Messages
Indication
Description
Divert OK
The diversion request was successful.
Divrt Fail
The diversion request failed.
Dcancel OK
The diversion cancel request was successful
Cancel Fail
The diversion cancel request failed.
Enable OK
The request to re-enable a radio was successful.
Enabl Fail
The request to re-enable a radio failed.
Disable OK
The request to disable a radio was successful.
Disabl Fail
The request to disable a radio failed.
Rad Avail.
The Radio ID is available and idle (availability check).
Invalid ID
The ID requested is not valid (availability check).
Rad Busy
The Radio ID is busy (availability check).
Rad Queued
The Radio ID is queued (availability check).
No Respnse
The Radio ID did not respond (availability check).
ESN Below
Full ESN information is shown in the console text window.
Pri’ty OK
The priority change request was successful.
Invld P’ty
Invalid priority level request.
Alrdy Used
Priority already restored to requested level.
Proc’ing
The Call filtering request is processing.
SettingsOK
The Call filtering request was successful.
Msg Fail
The Call filtering request failed.
Mismatch
Radio state mismatch.
Not Spprtd
Feature not supported by radio.
Unrecognized
Command requested not recognized by radio.
Summary of Contents for 4000 Sereis
