103
Operation
•
Long Alias
- User can program a longer alias, up to a 20 character alphanumeric
string, for a private ID. This is optional and is only displayed in the call history
window.
•
Status
- Used for all calls, the call or message status. For status messages, the status
displayed depends on the received status code. The status codes can be aliased to a
10-character alphanumeric string. For call alerts, the status “
--Alert--
” is
always shown. For private calls, the status “
NDC Privat
”is always shown. For
group calls, “
--Group--
” is always shown. For Emergency calls, the icon is a red
double triangle.
•
Date/Time
- In all cases, the date and time of reception is shown.
Figure 28: Call History Window with SDC calls
The icon at the front of each entry in the Window identifies the type of call received.
Referring to
, the entries from top to bottom are as follows:
• A Group Call from I_325_2 on talk group TG3. The long alias for I_325_2 is
“I_325_2Radio”.
• A Call Alert from I_325_2, on channel 34.
The operation of the Call History window is as follows:
• New received information displays on the top line with the old information
scrolling down.
• Up to 64 calls are maintained in the queue. If the display is full, the last line of the
display is pushed “off the bottom” of the screen. If the
CALL DELETE
key is used
to remove a line on the display, calls kept in the queue are shifted up.
• The
STATUS UP
and
STATUS DOWN
keys are used to move the status highlight
bar. You can also highlight an entry using the mouse.
• The
CALL REPLY
key can be used to reply to the private ID that is displayed on
the highlighted line automatically. This only applies to iDEN, SDC, and MAP27.
• The
CALL DELETE
key is used to remove the highlighted call from the queue.
All entries with the same ID as the highlighted call, old or new, are also deleted.
Note
Close IntegratorRD submenus, such as the Paging submenu, before
using the
Call Reply
key. If a submenu is active, the system is
operating with that context in mind and any attempt to use
Call
Reply
may result in operation that is different than expected.
Summary of Contents for 4000 Sereis
