ZETRON 4000 Sereis, Manual

Page: 134 / 160

Operating IntegratorRD Workstations
134 025-9535L
Table 16 lists the MDC-1200 call progress messages.
Figure 56: MDC-1200 Channel Box
Table 16: MDC-1200 Operation Call Progress Messages
Call History Window
When enabled, the window (as shown in Figure 57 ) shows a list of received status codes,
call alerts, and calls as they are received from the field units. The information includes the
following:
• TalkGroup/Chan - The talkgroup on which a group call was received, or the
MDC-1200 channel on which a selective call or call status/call alert was received.
Talkgroup IDs may be aliased to a 10 character alphanumeric string. The MDC-
1200 channel displayed matches the display in the channel box.
CHANNEL TITLE
CALL
CALL PROGRESS
GROUP/INDIV ID
BSY PAT VOL
Active when
receive call is
in-progress
Channel Busy
(Active during
transmit)
Call connection progress
Group and private call ID
shown here(up to 10 chars)
Channel Volume % (0-99)
and Squelch State
Patch Active Indication
Indication Description
Proc’ing Processing the request, sending MDC-1200 signal.
Transmit.. Transmitting over the air (talk time).
Emergency The operator has declared an emergency.
Disabled The workstation channel is disabled.
Stat Rx’d The radio Status Request message has completed successfully.
Stat Fail The radio Status Request message has failed.
No Respnse No respond from the workstation channel.
Alert OK The Call Alert requested has completed.
Alert Fail The Call Alert requested has failed.
Rad Avail. The Radio Check message has completed and the radio responded.
Enable OK The Radio Enable request has completed successfully.
Enabl Fail The Radio Enable request has failed.
Disable OK The Radio Disable request has completed successfully.
Disbl Fail The Radio Disable request has failed.
Msg OK The requested command has completed.
Msg Fail The requested command could not be completed.
Rejected The requested command is not a valid request.