Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 143 / 184

Version 8.0
G-30-1720-en
Page 143
OPMI Lumera i Care and maintenance
Sterilization
The asepsis sets available from ZEISS contain rubber caps and hand grips that
can be sterilized in autoclaves. For detailed information on sterilization, please
see the enclosed instructions “Preparation of resterilizable products” for the
respective asepsis set.
You can also use disposable sterile drapes to cover the system.
• Loosely attach the sterile drapes so that there is sufficient space for the
microscope supporting stand and the surgical microscope to move.
• Do not cover the ventilation slots in order to ensure that the lamps are
able to cool sufficiently and to avoid any loss in lamp functionality.
Disinfection
It may be necessary to disinfect the device surfaces.
The maximum application concentrations are:
– For alcohol (tested with 2-propanol): 60%
– For aldehyde (tested with glutaraldehyde): 2%
– For quaternary compounds (tested with DDAC): 0.2%
NOTE Surface damage caused by wrong disinfectants!
Performing disinfection with the wrong disinfectants may result in damage
to the surfaces of the device.
• Use an aldehyde and/or alcohol-based disinfectant. The addition of
quaternary compounds is acceptable.
• In order to prevent surface tensions, you may use only the disinfecting
components specified below.