Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 159 / 184

Version 8.0
G-30-1720-en
Page 159
OPMI Lumera i Device data
Electromagnetic immunity for all ME equipment and systems
The OPMI Lumera i is intended for operation in the electromagnetic environment
specified below. The customer or the user of the device OPMI Lumera i is
responsible for ensuring that it is operated in such an environment.
Electromagnetic immunity
tests IEC 60601 test level Compliance level
Electrostatic discharge (ESD)
as per IEC 61000-4-2
±8 kV
Contact discharge
±8 kV
Contact discharge
±2 kV, ±4 kV, ±8 kV, ±15 kV
Air discharge
±2 kV, ±4 kV, ±8 kV, ±15 kV
Air discharge
Fast transient/burst immunity
as per IEC 61000-4-4
±2 kV for
power supply lines
±2 kV for
power supply lines
±1 kV for
input/output lines
±1 kV for
input/output lines
Surges as per
IEC 61000-4-5
±0.5 kV, ±1 kV
phase-neutral voltage
±0.5 kV, ±1 kV
phase-neutral voltage
±0.5 kV, ±1 kV, ±2 kV
phase-neutral to ground voltage
±0.5 kV, ±1 kV, ±2 kV
phase-neutral to ground voltage
Magnetic field for
supply frequency (50/60 Hz) as
per IEC 61000-4-8
30 A/m
50 Hz or 60 Hz
30 A/m
50 Hz or 60 Hz
Voltage dips, short interruptions
and voltage variations as per
IEC 61000-4-11 0% UT for 1/2 cycle
at 0°, 45°, 90°, 135°, 180°, 225°,
270° and 315°
0% UT for 1/2 cycle
at 0°, 45°, 90°, 135°, 180°, 225°,
270° and 315°
0% UT for 1 cycle
and
70% UT for 25 cycles
Single-phase: at 0°
0% UT for 1 cycle
and
70% UT for 25 cycles
Single-phase: at 0°
0% UT for 250 cycles 0% UT for 250 cycles