Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 50 / 184

Device overview OPMI Lumera i
Version 8.0
Page 50 G-30-1720-en
9 Power output socket
for medical devices of max. 500 VA
10 Video output “RGB”
Analog port for video devices. The video signal is split into brightness
values of the basic colors red, green and blue which are transmitted
separately. Optimum output port for use with a connected 3 CCD video
camera. The maximum cable length depends on the quality of the cables.
11 Video output “Y/C - S-video”
Analog port for video devices. The video signal is output according to the
Y/C standard (separate lines for brightness and color signals). This standard
provides good image quality if the video signal is transmitted over short
distances (up to 10 m). Use the BNC port for longer distances.
12 Video output “BNC”
Analog port for video devices. The video signal is output according to the
VBS standard (joint line for brightness/color signals). This standard provides
good image quality if the video signal is transmitted over long distances
(more than 10 m).
CAUTION Danger! Electrical voltage!
Only connect accessories and medical devices designated by ZEISS for use
with this system to the power outlet sockets.
•
When connecting other devices, make sure that safety is guaranteed
regarding admissible touch currents and ground leakage currents
according to IEC 60601-1.