Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 125 / 184

Version 8.0
G-30-1720-en
Page 125
OPMI Lumera i Operation
Pairing
• Select <System Settings><System Options><FCP Pairing> in the main menu.

The “Pairing” menu is displayed.
• Put the foot control panel in its vertical position in the immediate vicinity
of the system (max. distance of 1 m) and keep it in this position until
pairing is finished.
• Start the pairing process by pressing the <Start Pairing> button on the 5.7"
control panel.

The following message appears: “System and foot control panel are
being paired”. Press any button of the foot control panel until the third
LED from above flashes amber*, and retain the vertical position of the
foot control panel”.
* color
Successful pairing

If pairing was successful, the “Radio link intensity” status indicator (1) flashes
green for approx. 1 s and the following message appears:
– “Pairing successfully completed. Put the foot control panel in horizontal
position and perform a function test. Use the wheel on the foot control
panel to set the number specified on the stand.”
• You can check whether pairing was successful by simultaneously pressing
any two buttons (2) on the foot control panel. The “Radio link intensity”
status indicator (1) then lights up.
Pairing failed

If pairing failed, the “Radio link intensity” status indicator (1) flashes red
for approx. 1 s and one of the following messages appears:
– “Pairing failed. No foot control panel was detected.”
– “Pairing failed. Several foot control panels were detected.”
• Repeat the pairing process as described above.
2
2
2
2
2
2
1