Preparation for use
OPMI Lumera i
Version 8.0
Page 66
G-30-1720-en
Mounting video and documentation accessories
You can connect the accessories for co-observation or video documentation
to the system. The following connection possibilities exist:
Connection via VOL 442/802 video objective lenses (see Page 67)
•
Mount the camera block on the video objective lens.
•
Mount the video objective lens and binocular tube on the microscope.
•
Mount the accessories on the video objective lens.
Connection via a beam splitter and C-mount adapter (see Page 70)
•
Mount the beam splitter and C-mount adapter.
WARNING
Risk of injury caused by accessories falling down
•
Never mount or remove any accessories during surgery.
•
Before every use and after re-equipping the system, make sure that the
accessory components are securely locked in position.
•
Make sure all the securing screws are firmly tightened!
CAUTION
Risk of toppling caused by excessive load on the surgical microscope!
Mounting and removing accessory components may cause unintended tilting
of the surgical microscope.
•
Never exceed the maximum permissible weight capacity of the suspension
arm (see Page 148).
Summary of Contents for OPMI Lumera i
