Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 53 / 184

Version 8.0
G-30-1720-en
Page 53
OPMI Lumera i Device overview
Components of the foot control panel
The foot control panel permits you to control various functions of the
suspension system and surgical microscope. The assignment of the functions
to the buttons on the foot control panel is shown on the following page.
You can only control functions which are implemented in the system
configuration used (stand, surgical microscope). Only use the foot control
panels mentioned here and in the ordering data:
– Foot control panel with 14 functions, wireless (FCP WL)
– Foot control panel with 14 functions, wired (FCP), 3 m (optional)
– Foot control panel with 14 functions, wired (FCP), 6 m (optional)
Set-up
1 Connector
for connecting the connection cable with the connector panel of the stand.
2 Silver-colored bracket
for storing the foot control panel on the stand.
Controls
– Buttons A, B, C, D, E, F
– Joystick K
Joystick K is used to control the XY coupling.
– Rocker switches G, H, I, J
The rocker switches are used to operate the Zoom and Focus functions.
Storage
When not using the foot control panel, you can attach it to the column of the
floor stand using the silver-colored bracket.
1
2
B
D
F
A
C
E
I
G
J
H
K