Zeiss OPMI Lumera i, Instructions For Use Manual

Page: 138 / 184

Care and maintenance OPMI Lumera i
Version 8.0
Page 138 G-30-1720-en
Device maintenance
Electromagnetic
compatibility (EMC)
No regular inspections or maintenance calls are required in order to maintain
electromagnetic compatibility (EMC).
Maintenance intervals
Regular preventive maintenance is required in order to ensure safe and correct
operation of the device as well as a long service life.
The following table lists the relevant maintenance activities and shows at which
maximum intervals they must be performed.
The maintenance activities that you are able to perform yourself are described
below.
Any other maintenance activities that is not described here in detail requires
device-specific knowledge.
Please contact your local ZEISS Service or authorized partner to arrange for
the timely performance of these maintenance activities.
Interval Maintenance tasks
Every 2 years Visual inspection and function test of the following modules:
– Suspension system with carrier arm
– Illumination and power supply unit
– Surgical microscope with binocular tube
– Light guide
– Mechanical brakes
– Power cord
– Connected accessories
– Adjustment screw for limiting downward travel
– OPMI coupling with securing screw
In accordance with country-
specific requirements Safety check