manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 89 / 190

Share
Download
YOKOGAWA DL850 ScopeCorder User Manual Download Page 89

4-5

IM DL850-03EN

Common Operations

1

2

3

4

5

6

App

Index

4.3  Using USB Keyboards and Mouse Devices

Connecting a USB Keyboard

  You can connect a USB keyboard and use it to enter file names, comments, and other items.

Usable Keyboards

  You can use the following keyboards that conform to USB Human Interface Devices (HID) Class 

Ver. 1.1.
•  When the USB keyboard language is English: 

104 keyboards

•  When the USB keyboard language is Japanese:   109 keyboards

Note

•  Do not connect incompatible keyboards.
•  The operation of USB keyboards that have USB hubs or mouse connectors is not guaranteed.
•  For USB keyboards that have been tested for compatibility, contact your nearest YOKOGAWA dealer.

USB Ports for Peripherals

  Connect a USB keyboard to the USB port for peripherals on the left side panel.

Connection Procedure

  Connect a USB keyboard directly to the DL850/DL850V using a USB cable. You can connect or 

remove the USB cable regardless of whether the DL850/DL850V power switch is turned on (hot-
plug support). Connect the type A connector of the USB cable to the DL850/DL850V, and connect 
the type B connector to the keyboard. When the power switch is on, the keyboard is detected and 
enabled approximately 6 seconds after it is connected.

Note

•  Only connect a compatible USB keyboard, mouse, printer, or storage device to the USB port for 

peripherals.

•  Do not connect multiple keyboards. You can connect one keyboard, one mouse, and one printer to the 

DL850/DL850V.

•  Do not connect and disconnect multiple USB devices repetitively. Wait for at least 10 seconds after you 

connect or remove one USB device before you connect or remove another USB device.

•  Do not remove USB cables during the time from when the DL850/DL850V is turned on until key operation 

becomes available (approximately 20 to 30 seconds).

Entering File Names, Comments, and Other Items

  When a keyboard is displayed on the screen, you can enter file names, comments, and other items 

using the USB keyboard.

Entering Values

  You can use a USB keyboard to enter the values of items with 

123

 marks on the menu screens by 

pressing CTRL+N on the USB keyboard to put the DL850/DL850V in the NUM LOCK state.

Summary of Contents for DL850 ScopeCorder































































































































































































Reviews:

No comments