manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 114 / 190

Share
Download
YOKOGAWA DL850 ScopeCorder User Manual Download Page 114

6-6

IM DL850-03EN

Real Time Math (Option)

These features are supported by firmware versions 1.30 and later of the DL850/DL850V. The following real time math operations 

are supported by firmware version 2.00 and later: resolver, IIR filter, and demodulation of the pulse width modulated signal.

Item

Specifications

Math expression

Real Time Math using hardware

Max. number of math channels

16 (select analog waveform storage or Real Time Math result storage)

Math source channels

Analog channel 1 to channel 16 (multi-channel modules can also be selected as math 

sources)

Math result

16 bits (2400 LSB/div). Results are converted to 16-bit values according to the scaling 

setting and stored in memory.

Digital filter

Math can be performed independently on each channel. Math can be performed on up 

to 16 channels at the same time.

Math rate

Max. math rate (sample rate): 1 MS/s. The math rate is selected automatically 

depending on the set frequency. The possible rates are 1 MS/s, 100 kS/s, 10 kS/s, 1 

kS/s and 100 S/s.

Filter types

Mean (moving average)

Filter format:

FIR (moving average)

Filter type:

LPF

Number of moving 

average points:

Selectable from 2, 4, 8, 16, 32, 64, and 128

Gauss:

Filter format:

FIR

Filter type:

LPF

Filter order:

5 to 49

Cutoff frequency:

300 kHz to 2 Hz
Resolution:

300 kHz to 30 kHz, in steps of 2 kHz

Resolution:

29.8 kHz to 3 kHz, in steps of 200 Hz

Resolution:

2.98 kHz to 300 Hz, in steps of 20 Hz

Resolution:

298 Hz to 30 Hz, in steps of 2 Hz

Resolution:

29.8 Hz to 2 Hz, in steps of 0.2 Hz

Cutoff characteristic: –3.0 × (f/fc)

2

 (where f is the frequency and fc is the cutoff 

frequency)

Sharp:

Filter format:

FIR

Filter type: 

LPF, HPF, BPF

Filter order:

5 to 194

LPF:

Cutoff frequency: 300 kHz to 2 Hz
Resolution:

300 kHz to 30 kHz, in steps of 2 kHz

Resolution:

29.8 kHz to 3 kHz, in steps of 200 Hz

Resolution:

2.98 kHz to 300 Hz, in steps of 20 Hz

Resolution:

298 Hz to 30 Hz, in steps of 2 Hz

Resolution:

29.8 Hz to 2 Hz, in steps of 0.2 Hz

HPF:

Cutoff frequency: 300 kHz to 200 Hz
Resolution:

300 kHz to 30 kHz, in steps of 2 kHz

Resolution:

29.8 kHz to 3 kHz, in steps of 200 Hz

Resolution:

2.98 kHz to 200 Hz, in steps of 20 Hz

BPF:

Center frequency: 300 kHz to 300 Hz
Resolution:

300 kHz to 30 kHz, in steps of 2 kHz

Resolution:

29.8 kHz to 3 kHz, in steps of 200 Hz

Resolution:

2.98 kHz to 300 Hz, in steps of 20 Hz

Bandwidth:

200, 150, 100, 50, 20, 15, 10, 5, 2, 1.5, 1 

kHz, 500, 200 Hz (there are limits based on 

the center frequency)

Cutoff characteristic: –40 dB @ 2fc (LPF), –40 dB @ 0.5fc (HPF)
Phase:

Linear phase characteristics

IIR:

Filter format:

IIR (Butterworth)

Filter type: 

LPF, HPF, BPF

Filter order:

4

6.5  Features

Summary of Contents for DL850 ScopeCorder































































































































































































Reviews:

No comments