YOKOGAWA DL850 ScopeCorder User Manual Download Page 35

Page: 35 / 190

2-5

IM DL850-03EN

Main Features

App

Index

Edge On A Trigger (Enhanced)

While state condition A is met, the DL850/DL850V triggers on the OR of multiple trigger source

edges.

Edge detection

Trigger

Condition A is being met

OR Trigger

The DL850/DL850V triggers on the OR of multiple trigger source edges.

AND Trigger

The DL850/DL850V triggers on the AND of multiple trigger source conditions. The DL850/DL850V

triggers when all the specified conditions are met at a single point.

Period Trigger

The DL850/DL850V triggers on a specified period of occurrence of state condition B. The DL850/

DL850V triggers when state condition B occurs again.

Met

Trigger

Reference time T

Pulse Width Trigger

The DL850/DL850V triggers according to the relationship between the state condition B

achievement time and the specified reference times (Time or T1 and T2).

Achievement time

Trigger

Wave Window Trigger

The DL850/DL850V creates real-time templates (Wave Window) using a number of cycles directly

preceding the current waveforms. The DL850/DL850V compares the current waveforms to the real-
time templates and triggers if one of the current waveforms falls outside of its real-time template.

Reference cycles

(example: the waveforms for the four previous cycles)

Current

waveform

Real-time template

Average waveform

+ tolerance width

Trigger

Average of 1, 2, or

4 cycles

The DL850/DL850V compares the

current waveform to the real-time

template and triggers if the current

waveform falls outside of the

real-time template.

Measured waveform

Tolerance width

2.2 Triggering

Summary of Contents for DL850 ScopeCorder































































































































































































Search results

Summary of Contents for DL850 ScopeCorder

Reviews:

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 35 / 190

Search results

Summary of Contents for DL850 ScopeCorder

Reviews: