YOKOGAWA DL850 ScopeCorder User Manual Download Page 19

Page: 19 / 190

1-1

IM DL850-03EN

Names and Functions of Parts

App

Index

1.1 Top Panel, Front Panel, Right Side Panel, and

Left Side Panel

Top Panel

Built-in printer (optional)

Vent

Handle

You can print the display.

WARNING

CAUTION

Do not operate without reading the safety precautions.

Protect the instrument from vibration or shock when power is ON

(especially for internal hard disk type).

Make sure to screw input modules firmly into place.

Switch power OFF before removing input modules.

To prevent injury, do not put your hand inside the slots.

Complies with 21 CFR 1040.10 and 1040.11

Yokogawa Electric Corporation

2-9-32 Nakacho, Musashino-shi

Tokyo, 180-8750, Japan

Chapter 1

Names and Functions of Parts

Summary of Contents for DL850 ScopeCorder































































































































































































Search results

Summary of Contents for DL850 ScopeCorder

Reviews:

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 19 / 190

Search results

Summary of Contents for DL850 ScopeCorder

Reviews: