YOKOGAWA DL850 ScopeCorder User Manual Download Page 130

Page: 130 / 190

6-22

IM DL850-03EN

Combined with the 700929 or 701947

700929

701947

701901

701954

Combined with the 701954

Direct input (cable that does not comply with the safety standards)

BNC

Withstand voltage: 1500 Vrms for 1 minute

Allowable transient surge voltage: ±2100 Vpeak

(between earth and input)

8 The typical value is a representative or standard value. It is not strictly warranted.

WARNING

• Do not apply input voltage exceeding the maximum input voltage, withstand voltage, or

allowable surge voltage.

• To prevent the possibility of electric shock, be sure to furnish protective earth grounding of

the DL850/DL850V.

• To prevent the possibility of electric shock, be sure to fasten the module screws. Otherwise,

the electrical and mechanical protection functions will not be activated.

• Avoid continuous connection under an environment in which the surge voltage may occur.
• To prevent the possibility of electric shock, be sure to connect the GND lead of the

differential probe (700924/700925) to the DL850/DL850V.

6.13 Module Specifications

Summary of Contents for DL850 ScopeCorder































































































































































































Search results

Summary of Contents for DL850 ScopeCorder

Reviews:

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 130 / 190

Search results

Summary of Contents for DL850 ScopeCorder

Reviews: