manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 155 / 190

Share
Download
YOKOGAWA DL850 ScopeCorder User Manual Download Page 155

6-47

IM DL850-03EN

Specifications

1

2

3

4

5

6

App

Index

 

CAUTION

•  Correct measurements cannot be obtained when the positive and negative thermocouple 

leads are connected in reverse.

•  Immediately after connecting the thermocouple, the heat balance may be disturbed at 

the input terminal section and may cause measurement errors. Therefore, wait about ten 
minutes before making a measurement.

•  In an environment where the air from the air conditioning is directly applied to the input 

terminals or where there are effects from a heat source, the heat balance may be disturbed 
at the input terminal section and cause measurement errors.

  When making measurements in this type of environment, take preventive measures such 

as changing the position.

6.13  Module Specifications

Summary of Contents for DL850 ScopeCorder































































































































































































Reviews:

No comments