manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 60 / 190

Share
Download
YOKOGAWA DL850 ScopeCorder User Manual Download Page 60

Connecting Differential Probes (700924)

When using differential probes (700924) made by YOKOGAWA, connect the BNC output connector 
to the input terminal of the oscilloscope. Also, be sure to connect the GND lead to the functional 
ground terminal of the DL850/DL850V. If necessary, use the auxiliary grounding lead extension. A 
measurement of 1400 Vpeak is possible by connecting the GND lead to the DL850/DL850V.
For details on the connection procedure, see the manual that came with the differential probe.

 

Functional ground terminal

GND lead

 

WARNING

In Using the High Voltage Differential Probes

Be sure to connect the GND lead of a differential probe (the 700924 or 700925) to the 
functional ground terminal on the right side panel of the DL850/DL850V. Otherwise, high 
voltage may appear at the BNC connector making it dangerous. Also, be sure to connect the 
GND lead to the DL850/DL850V before you connect to the device under measurement.

3.5  Connecting Probes

3-19

IM DL850-03EN

Making Preparations for Measurements

1

2

3

4

5

6

App

Index

Summary of Contents for DL850 ScopeCorder































































































































































































Reviews:

No comments