manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 72 / 190

Share
Download
YOKOGAWA DL850 ScopeCorder User Manual Download Page 72

 When using the charge converter

  Connect a charge-output-type acceleration sensor to the charge converter using a high-insulation, 

low-noise cable. By driving the charge converter using a constant current from the DL850/DL850V, 
voltage signals similar to those of the built-in amplifier type acceleration sensor can be obtained. 
The DL850/DL850V measures the signals in the acceleration measurement mode and supplies 
bias current to the charge converter. Set the input sensitivity of the DL850/DL850V according to the 
charge converter gain and the sensitivity of the charge output type acceleration sensor.

  The DL850/DL850V only supports charge converters that are driven by constant current with driving 

current of 4 mA and driving voltage of 22 V.

 

 

Charge-output-type 

acceleration sensor

Normal coaxial 

cable

High-insulation, 

low-noise cable

Charge 

converter

701275(ACCL/VOLT)

(acceleration measurement)

DL850/DL850V

Note

The unit of measu

r

ement of acceleration on the DL850/DL850V is m/s

2

. If the sensitivity is indicated in mV/G 

for the acceleration sensor that you are using, convert it to m/s

2

. (1 G = 9.81 m/s

2

)

Precautions

•  Do not apply shock outside the specifications (see the manual for the acceleration sensor) to the 

acceleration sensors. Doing so can damage the sensors.

•  Do not impose drastic temperature changes on the acceleration sensors. Temperature changes 

may affect the output value of the acceleration sensors.

•  By default, the bias current on the acceleration sensors is turned off. Be sure to turn it on before 

using the acceleration sensors. Bias current is valid only when measuring acceleration. When 
measuring other parameters, it is automatically turned off. The bias current on/off setting is saved 
when the DL850/DL850V is turned off.

3.11  Connecting an Acceleration Sensor

3-31

IM DL850-03EN

Making Preparations for Measurements

1

2

3

4

5

6

App

Index

Summary of Contents for DL850 ScopeCorder































































































































































































Reviews:

No comments