manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, User Manual, Page: 124 / 190

Share
Download
YOKOGAWA DL850 ScopeCorder User Manual Download Page 124

6-16

IM DL850-03EN

Item

Specifications

Battery backup

The settings and clock are backed up with an internal lithium battery.

Backup battery life

Approx. five years (at an ambient temperature of 25°C)

Safety standard

Compliant standards

EN61010-1, EN61010-2-030, EN61010-031, EN 60825-1

• Overvoltage category (installation category) II

3

• Measurement Category: See the specifications of each module.

4

• Pollution degree 2

5

Approved (DL850/DL850V, 701250, 701251, 701255, 701267, 701261, 701262, 701265, 

701270, 701271, 701275, 701280, 720210, 720220, 720221, 720230, 720240, 720241, 700986, 

700987, 701953, 701955, 701956, 701957, 701958, 702911, 702912)

• Bridgehead for the strain module

Use the 701955 or 701956 with the 701270, and use the 701957 or 701958 with the 701271.

Emissions

Compliant standards

EN61326-1 ClassA, EN61326-2-1, EN 55011 Class A, Group 1, EMC Regulatory Arrangement 

in Australia and New Zealand EN 55011 Class A, Group 1, Korea Electromagnetic Conformity 

Standard (

한국 전자파적합성기준

)

Approved (DL850/DL850V, 701250, 701251, 701255, 701267, 701261, 701262, 701265, 

701270, 701271, 701275, 701280, 720210, 720220, 720221, 720230, 720240, 720241, 

700986, 700987, 701953, 701955, 701956, 701957, 701958, 702911, 702912)

EN61000-3-2, EN61000-3-3

This product is a Class A (for industrial environments) product. Operation of this product in a 

residential area may cause radio interference in which case the user is required to correct the 

interference.

Test items

1. Power supply terminal noise

2. Radiation emission

3. Power supply harmonic regulation

4. Power supply voltage fluctuation and flicker

Cable conditions (DL850/DL850V)

Current probe

When connecting a current probe to the input terminal and probe power terminal of a module, 

attach a single ferrite core

6

 to both cables on the side of the cables closest to the DL850/

DL850V.

GP-IB cable

Use a shielded cable that is 3 m or less in length.

USB cable

Use a shielded cable that is 3 m or less in length, and attach a ferrite core

6

 to the side of the 

cable closest to the DL850/DL850V.

Ethernet cable

Use a shielded cable that is 3 m or less in length, and attach a ferrite core

6

 to the side of the 

cable closest to the DL850/DL850V.

External clock input, external trigger input, external trigger output

Use a shielded cable that is 3 m or less in length, and attach a ferrite core

6

 to the side of the 

cable closest to the DL850/DL850V.

IRIG cable

Use a shielded cable that is 3 m or less in length, and attach a ferrite core

6

 to the side of the 

cable closest to the DL850/DL850V.

External HDD cable

Use a shielded cable that is 3 m or less in length.

Video signal output cable

Use a shielded cable that is 3 m or less in length, and attach a ferrite core

7

 to the side of the 

cable closest to the DL850/DL850V.

External I/O cable

Use a shielded cable that is 3 m or less in length, and attach a ferrite core

6

 to the side of the 

cable closest to the DL850/DL850V.

DC power cable

Attach a ferrite core

7

 to the DC power cable.

Probe power cable

Use the dedicated cable, and wrap it once around a ferrite core

6

 on the side of the cable 

closest to the DL850/DL850V.
Example of wrapping the cable around once

6.12  General Specifications

Summary of Contents for DL850 ScopeCorder































































































































































































Reviews:

No comments