YASKAWA HV600 Manual Download Page 483

Page: 483 / 610

Parameter

Details

2.14 Y: Application Features

YASKAWA

TOEPYAIHV6002A HV600 Drive Programming

483

■

Home Screen Text

When

Y1-01 = 3 [Multiplex Mode = Memobus Network]

and

o1-40 = 0 [Home Screen Display Selection = Custom

Monitor]

, the top line text of the HOME Screen Status Display is different as specified by the AUTO Mode Run

command or the Network Run command.

Keypad Display

Network State

•

The drive is not operating in Auto Mode.

•

Drive cannot accept commands from the HV600 MEMOBUS network.

•

The drive is in Auto Mode.

•

The drive is waiting for a Run command from the HV600 MEMOBUS network.

•

The drive is in Auto Mode.

•

The drive is in Lead operation and is regulating the system.

•

This drive sets staging and de-staging conditions.

•

The drive is in Auto Mode.

•

The drive is in Lag operation and is holding the speed at the time it made the switch
from a Lead Drive to a Lag.

•

The drive will hold the speed until the

Y9-07 [Lag Fixed Speed Delay]

time is expired.

•

The drive is in Auto Mode.

•

The drive is in Lag operation and is operating at the speed set in

Y9-06 [Lag Fixed

Speed]

•

The drive is in Auto Mode.

•

The drive is in Lag operation and is following the speed of the current Lead Drive.

The drive is in Alternation Stabilization Mode.

Summary of Contents for HV600



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for HV600

Reviews:

Related manuals for HV600

Brands by name

Popular brands

YASKAWA HV600, Manual

Search results

Summary of Contents for HV600

Reviews:

Related manuals for HV600

Brands by name

Popular brands