YASKAWA HV600, Manual

Page: 57 / 610

Parameter
List
1
1.10 H: Terminal Functions
YASKAWA TOEPYAIHV6002A HV600 Drive Programming 57
Setting Value Function Description Ref.
7B KEB Ride-Thru 2
Activate (N.O.)
Sets operation of the KEB2 function through the KEB Ride-Thru 2 (N.O.).
ON : Deceleration during momentary power loss
OFF : Normal operation
298
7C Short Circuit Braking (N.
O.)
Sets operation of Short Circuit Braking (N.O.).
ON : Short Circuit Braking is enabled.
OFF : Normal operation
Note:
When A1-02 = 8 [Control Method Selection = EZOLV] , this function is available only when you use a PM motor.
299
7D Short Circuit Braking (N.
C.)
Sets operation of Short Circuit Braking (N.C.).
ON : Normal operation
OFF : Short Circuit Braking is enabled.
Note:
When A1-02 = 8 [Control Method Selection = EZOLV] , this function is available only when you use a PM motor.
299
82 PI Switch to Aux
Sets YF-xx [PI Auxiliary Control] parameters as primary PI loop parameters and disables b5-xx [PID Control] .
Note:
When this input is active, YF-xx [PI Auxiliary Control] parameters will always be the primary PI loop parameters.
Parameter YF-20 [PI Aux Main PI Speed Control] does not have an effect.
299
83 Dedicated Multi-Setpoint
YA-02
Sets the function to set the PID setpoint to YA-02 [Setpoint 2] .
Note:
If you use this function and one of H1-xx = 3E or 3F [PID Setpoint Selection 1 or 2] at the same time, the drive
will detect an oPE03 [Multi-Function Input Setting Err] .
ON : YA-02 is PID setpoint.
OFF : YA-01 [Setpoint 1] , YA-03 [Setpoint 3] , or YA-04 [Setpoint 4] is PID setpoint.
299
84 Dedicated Multi-Setpoint
YA-03
Sets the function to set the PID setpoint to YA-03 [Setpoint 3] . Set this function and H1-xx = 83 [Dedicated Multi-
Setpoint YA-02] at the same time.
Note:
If you use this function and one of H1-xx = 3E or 3F [PID Setpoint Selection 1 or 2] at the same time, the drive
will detect an oPE03 [Multi-Function Input Setting Err] .
ON : YA-03 is PID setpoint.
OFF : YA-01 [Setpoint 1] , YA-02 [Setpoint 2] , or YA-04 [Setpoint 4] is PID setpoint.
300
85 Dedicated Multi-Setpoint
YA-04
Sets the function to set the PID setpoint to YA-04 [Setpoint 4] . Set this function, H1-xx = 83 [Dedicated Multi-Setpoint
YA-02] , and H1-xx = 84 [Dedicated Multi-Setpoint YA-03] at the same time.
Note:
If you use this function and one of H1-xx = 3E or 3F [PID Setpoint Selection 1 or 2] at the same time, the drive
will detect an oPE03 [Multi-Function Input Setting Err] .
ON : YA-04 is PID setpoint.
OFF : YA-01 [Setpoint 1] , YA-02 [Setpoint 2] , or YA-03 [Setpoint 3] is PID setpoint.
300
88 Thermostat Fault
Sets the drive to show the VLTS [Thermostat Fault] when the input terminal is ON.
Note:
This function is active when the drive is running.
300
90 DWEZ Digital Input 1
Sets digital input 1 to use in DriveWorksEZ. Refer to the DriveWorksEZ online manual for more information.
300
91 DWEZ Digital Input 2
Sets digital input 2 to use in DriveWorksEZ. Refer to the DriveWorksEZ online manual for more information.
300
92 DWEZ Digital Input 3
Sets digital input 3 to use in DriveWorksEZ. Refer to the DriveWorksEZ online manual for more information.
300
93 DWEZ Digital Input 4
Sets digital input 4 to use in DriveWorksEZ. Refer to the DriveWorksEZ online manual for more information.
300
94 DWEZ Digital Input 5
Sets digital input 5 to use in DriveWorksEZ. Refer to the DriveWorksEZ online manual for more information.
300
95 DWEZ Digital Input 6
Sets digital input 6 to use in DriveWorksEZ. Refer to the DriveWorksEZ online manual for more information.
300
96 DWEZ Digital Input 7
Sets digital input 7 to use in DriveWorksEZ. Refer to the DriveWorksEZ online manual for more information.
300
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV