534
YASKAWA
TOEPYAIHV6002A HV600 Drive Programming
6.
Push
or
to select the specified digit, then push
or
to select the correct number.
• Push
(Default) to set the parameters to the factory default.
• Push
(Min/Max) to move between the minimum value and maximum value.
7.
Push
to keep the changes.
The configuration procedure is complete.
◆
Show Monitor Items as a Trend Plot
The procedure in this section shows how to show the selected monitor data as a trend plot.
1.
Push
(Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
, push
(Back) to show [Home] on
.
2.
Push
(Menu).
3.
Push
or
to select [Monitors], then push
.
4.
Push
or
to select [Trend Plot], then push
.
The screen will show the monitors as shown in this figure.
