YASKAWA HV600, Manual

Page: 310 / 610

2.8 H: Terminal Functions
310 YASKAWA TOEPYAIHV6002A HV600 Drive Programming
L4-01: L4-02:
Figure 2.62 User-Defined Speed Agree 1 Time Chart
■
4: Frequency Detection 1
Setting Value Function Description
4 Frequency Detection 1
The terminal deactivates when the output frequency > “ L4-01 [Speed Agree Detection Level] + L4-02 [Speed Agree Detection
Width]
”
. After the terminal deactivates, the terminal stays deactivated until the output frequency is at the value of L4-01 .
Note:
The detection function operates in the two motor rotation directions. The drive uses the L4-01 value as the forward/reverse detection level.
ON : The output frequency < L4-01 , or the output frequency
≤
“ L4-01 + L4-02 ”
OFF : The output frequency > “ L4-01 + L4-02 ”
L4-01: L4-02:
Figure 2.63 Frequency Detection 1 Time Chart
Note:
Figure 2.63 shows the result of the configuration when L4-07 = 1 [Speed Agree Detection Selection = Detection Always Enabled] . The
default setting of L4-07 is 0 [No Detection during Baseblock] . When the speed agreement detection selection is “ No Detection during
Baseblock ” , the terminal is deactivated when the drive output stops.
■
5: Frequency Detection 2
Setting Value Function Description
5 Frequency Detection 2
The terminal activates when the output frequency > L4-01 [Speed Agree Detection Level] . After the terminal activates, the terminal
stays activated until the output frequency is at the value of
“
L4-01 - L4-02 [Speed Agree Detection Width]
”
.
Note:
The detection function operates in the two motor rotation directions. The drive uses the L4-01 value as the forward/reverse detection level.
ON : The output frequency > L4-01
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV