Yamaha WR426F(P), Owner'S Service Manual

Page: 584 / 776

5 - 15
CHAS
FRONT BRAKE AND REAR BRAKE
EC5A3000
REMOVAL POINTS
Brake fluid
1. Remove:
[Front]
●
Master cylinder cap 1
[Rear]
●
Master cylinder guard 1
●
Reservoir tank cap 2
NOTE:
Do not remove the diaphragm.
Å
Front
ı
Rear
2. Connect the transparent hose 2 to the
bleed screw 1 and place a suitable con-
tainer under its end.
Å
Front
ı
Rear
3. Loosen the bleed screw and drain the
brake fluid while pulling the lever in or
pushing down on the pedal.
CAUTION:
●
Do not reuse the drained brake fluid.
●
Brake fluid may erode painted surfaces or
plastic parts. Always clean up spilled
fluid immediately.
Å
ı
Å ı
EC533301
Caliper piston
1. Remove:
●
Caliper piston
Use compressed air and proceed care-
fully.
WARNING
●
Cover piston with rag and use extreme
caution when expelling piston from cylin-
der.
●
Never attempt to pry out piston.
Å
Front
ı
Rear
Caliper piston removal steps:
●
Insert a piece of rag into the caliper to lock
one caliper.
●
Carefully force the piston out of the caliper
cylinder with compressed air.
Å
ı