Xerox Versant 4100 Press, User Documentation

Page: 214 / 430

Number
Component Description
1 Left Cover * Open this cover to remove paper jams.
2 Right Cover * Open this cover to remove paper jams.
3 Circuit Breaker Switch on the rear of
device Automatically shuts off electricity in the event
of an electrical fault or a short circuit.
4 Booklet Tray This tray receives square-fold booklet output
from the finisher.
5 Square-fold Adjustment Button Press this button to adjust the thickness of
printed booklets.
6 Paper Jam and Error Indicator Lights when a paper jam occurs.
7 Trimmer Waste Container Collects waste from the trimmer area of the
device.
* The covers cannot be opened during normal operation or when the press is idle. The covers can be
opened only when an indicator is lit and a jam or fault occurs within the SquareFold
® Trimmer
device.
SquareFold ® Trimmer Circuit Breaker
The circuit breaker is located on the rear of the device. The circuit breaker is normally in the ON
position.
Note: When an electrical interruption is detected, the circuit breaker automatically switches off
to discontinue the electrical flow to the device. For electrical information, refer to Safety .
Under normal operating conditions, this switch should not be touched. If the press is moved, press
this button to switch off power to the device.
214 Xerox ® Versant ® 4100 Press
User Documentation
Working With