Xerox Versant 4100 Press, User Documentation

Page: 110 / 430

My Ratings
You can set your own valuation for stocks. The My Ratings values are retained locally on the press.
To set the rating for a stock, in the
My Ratings
column, click one of the 5 stars.
Last Updated
The
Last Updated
column displays the most recent date and time when a stock was edited or
changed.
Comment
This section allows the user to enter information about the paper, such as a brand name or job-
specific information. A maximum of 256 characters is allowed.
In addition to the stock attributes, to ensure print engine adjustments to optimize print performance
for the stock, use the following features:
Advanced Setup
Select this option to open and access the
Advanced Stock Setup
options and for more
information, refer to Advanced Stock Setup .
Test Print
Select this option to run test prints. For more information and instructions, refer to Test Print .
A Acccceessssiinngg tthhee SSttoocckk LLiibbrraarryy ffrroom m TTrraayy PPrrooppeerrttiieess
The Stock Library list contains the names of all the stocks that are specific to your press.
The Stock Library list is available either from PredictPrint Media Manager → Stock Library , or through
the Tray Stock Properties window.
From the
Tray Stock Properties
window, you can select to load a stock from the following options:
• Stock Library
• Media List
Accessing the Stock Library List from Tray Properties
1. Select a tray from the PredictPrint Media Manager Trays tab.
The
Tray Stock Properties
window appears.
2. Click Stock Library .
The Stock Library list appears.
3. To close the Stock Library list, select Cancel or the x in the upper-right corner of the window.
4. From Tray Stock Properties , select either OK or Cancel .
The
Tray Stock Properties
window closes and the PredictPrint Media Manager main window
appears.
Accessing the Media List from Tray Properties
1. From the PredictPrint Media Manager Trays tab, select a tray.
The
Tray Stock Properties
window appears.
110 Xerox ® Versant ® 4100 Press
User Documentation
Working With