Xerox Versant 4100 Press, User Documentation

Page: 13 / 430

LLaasseerr SSaaffeettyy
N Noorrtthh A Am meerriiccaa LLaasseerr SSaaffeettyy
This product complies with safety standards and is certified as a Class 1 Laser product under the
Center for Devices and Radiological Health (CDRH) of the United States Food and Drug
Administration (FDA) implemented regulations for laser products. This product complies with FDA
performance standards for Laser products except for deviations pursuant to Laser Notice No. 50
dated June 24, 2007. These regulations apply to laser products marketed in the United States. The
label on the Production Press indicates compliance with CDRH regulations and must be attached to
laser products marketed in the United States. This product does not emit hazardous laser radiation.
Laser Warning: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous exposure of laser light.
Since radiation emitted inside this product is completely confined within the protective housing and
external covers, the laser beam cannot escape from the Production Press during any phase of the user
operation.
This product contains laser warning labels. These labels are intended for use by the Xerox Service
Representative and are placed on or near panels or shields that require special tools for removal. Do
not remove any of the panels. There are no operator serviceable areas in these covers.
EEuurrooppeeaann U Unniioonn ((EEU U)) LLaasseerr SSaaffeettyy
This product complies with IEC safety standard EN 60825-1: 2014.
The equipment complies with laser product performance standards set by governmental, national,
and international agencies as a Class 1 Laser Product. It does not emit hazardous radiation as the
beam is totally enclosed during all phases of customer operation and maintenance.
WARNING: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
If you need additional safety information about the product or Xerox supplied materials, you can
email request to
EHS-Europe@xerox.com .
O Oppeerraattiioonnaall SSaaffeettyy
Your Xerox equipment and supplies were designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
Your attention to the following safety guidelines will help ensure the continued safe operation of your
Press:
• Do not remove any trays when the Press is printing.
• Do not open the doors when the Press is printing.
• Keep hands, hair, neckties, and so on, away from the exit and feed rollers.
• Covers, which require tools for removal, protect the hazard areas within the Press. Do not remove
the protective covers.
Xerox ® Versant ® 4100 Press
User Documentation
13
Learning About