Xerox Versant 4100 Press User Documentation Download

Page: 340 / 430

TTrraayyss 66 aanndd 77 PPaappeerr JJaam

mss aatt LLeevveerr 11bb aanndd KKnnoobb 11cc

1. Open the front cover of the feeder module.

2. Move the lever

to the right and turn the knob

to the right. Remove the jammed paper.

Note:

If paper is torn, check for any torn pieces of paper inside the machine.

3. Return the lever

to the original position.

4. Close the front cover of the feeder module.

Note:

If the front cover of the feeder module is not completely closed, a message will

appear and the press will not operate.

TTrraayyss 66 aanndd 77 PPaappeerr JJaam

mss aatt LLeevveerr 11dd aanndd KKnnoobb 11cc

Note:

If paper is torn, check for any torn pieces of paper inside the machine.

340

Xerox

Versant

4100 Press

User Documentation

Troubleshooting

Summary of Contents for Versant 4100 Press















































































































































































































































































































































































































































Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands

Xerox Versant 4100 Press, User Documentation

Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands