Xerox Versant 4100 Press, User Documentation

Page: 389 / 430

• Additionally, if a fault occurs with the C/Z Folder, an indicator lights on the PR Finisher control
panel and shows the corresponding area on the C/Z Folder where the fault occurred.
Always refer to the following information when clearing paper jams:
• Do not power off the press when removing paper jams.
• Paper jams can be removed with the press still powered on. When the power is turned off, all
information stored to the system memory is erased.
• Clear all paper jams before resuming print jobs.
• Do not touch components inside the press. This can cause print defects.
• Ensure that all paper jams, including any small ripped pieces of paper, are cleared before
proceeding with print jobs.
• Gently remove the paper taking care not to tear it. If paper is torn, be sure to remove all torn
pieces.
• After removing paper jams, close all doors and covers. The press cannot print when doors or covers
are open.
• After clearing a paper jam, printing automatically resumes from the state before the paper jam
occurred.
• If all paper jams are not cleared, an error message continues to display on the press touch screen.
To clear any remaining jams, refer to the press touch screen for instructions and information.
Clearing Paper Jams from Folder Area E10
1. Open the folder front cover.
Xerox ® Versant ® 4100 Press
User Documentation
389
Troubleshooting