Xerox Versant 4100 Press, User Documentation

Page: 120 / 430

• Pre Gate Roll Adjustment : Refer to Pre Gate Roll Adjustment .
• Test Print : Refer to Test Print .
• Primary Transfer Current Adjustment : Refer to Primary Transfer Current Adjustment .
• Secondary Transfer Voltage Adjustment : Refer to Secondary Transfer Voltage Adjustment .
• Transfer output adjustment for trail edge : Refer to Transfer Output Adjustment for Trail Edge .
• Adjustment of Paper Speed at Transfer : Refer to Adjustment of Paper Speed at Transfer .
• Fuser Temperature Adjustment : Refer to Fuser Temperature Adjustment .
• Fuser Speed Adjustment : Refer to Fuser Speed Adjustment .
• Alignment Profile : Refer to Alignment Profile .
• Fold Adjustment Profile : Refer to Fold Adjustment Profile .
• Paper Curl Correction : Refer to Paper Curl Correction .
Stock By Name Only
When this option is selected (yes or true), stock can be selected from the print server or from the print
driver of the client only by explicitly selecting its specific stock name (as shown in the Stock Library)
and not by matching various parameters (such as weight, type, and coating). Selecting this option (by
placing a check mark in the box) can prevent the inadvertent use of expensive or specialty stocks for
slip-sheets, automatic paper selection, or generic paper requests by the user.
Tip: The behavior of this option is dependent on print server implementation; therefore, the
functionality of this option may vary from one print server to another. Furthermore, because
the option is dependent on print server implementation, this option may not function as
detailed here.
When this option is unchecked (no or false), stocks can be selected from the print server or from the
print driver of the client by matching the same attributes (such as weight, type, and coating) as those
listed for stocks in the Stock Library. Stock names also are examined, but are not used exclusively.
Multifeed Detection
Note: This option is available only with the Trays 6, 7, 8, and 9. It does not function with Trays
1-3.
When this option is selected (yes or true), the press detects and prevents multiple sheets from being
pulled simultaneously from the tray.
When this option is unchecked (no or false), the press ignores any multiple sheets that may feed
through the paper path. Uncheck this option only as a temporary measure which allows the user to
continue their workflow until the service representative resolves the problem.
Tray Air Assist
This option allows you to optimize and control the environmental conditions in your paper trays,
which in turn ensures optimum print capability. Use
Tray Air Assist option to switch on or off fans in
a paper tray to eliminate misfeeds, multifeeds, paper jams, or other possible tray feeding problems.
These fans blow air to the paper stack during the feeding operation and separate sheets of paper
thereby providing a stable feed of paper.
Select one of the following options from the drop-down menu:
120 Xerox ® Versant ® 4100 Press
User Documentation
Working With