Xerox Versant 4100 Press, User Documentation

Page: 314 / 430

review the entire Fold Adjustments section in the PredictPrint Media Manager .
• Depending on your system configuration, the following fold adjustments are available:
– Bi-Fold Single Sheet (available only with the PR Booklet Maker Finisher)
– Bi-Fold Multiple Sheets (available only with the PR Booklet Maker Finisher)
– Bi-Fold Multiple Sheets Stapled (available only with the PR Booklet Maker Finisher)
– C-Fold (available with the optional C/Z Folder)
– Z-Fold (available with the optional C/Z Folder)
– Z-Fold Half-Sheet (available with the optional C/Z Folder)
Create a new or use an existing Fold Adjustment Profile . The following steps are required for creating
a new or using an existing procedure.
Note: This option is accessed from PredictPrint Media Manager → Profiles → Fold Adjustment
Profile .
1. From the PredictPrint Media Manager main screen, select Profiles .
2. Select the Fold Adjustment tab.
3. Select New or Edit .
If you edit an existing fold adjustment, select the desired profile from the list and then select Edit .
4. Type in a new name or, if desired, edit the existing name.
5. To complete the procedure, refer to Fold Adjustment Procedures . Select the desired fold
adjustment procedure and complete the procedure for creating a new or editing an existing Fold
Adjustment Profile .
SSm meeaarr 220088 m mm m ffrroom m tthhee LLeeaadd EEddggee
Problem
On the printed output, a smear occurs at 208 mm from the lead edge of the paper.
For more information, refer to the Advanced Stock Setup .
Solutions
1. Confirm the media being used is compatible with the press, is within supported specifications, and
in good condition.
2. Change the Adjustment of Paper Speed at Transfer setting.
• Use this feature to adjust the paper speed in the transfer unit.
• The option can be found in PredictPrint Media Manager → Stock Library → Stock
Properties → Advanced Setup → Adjustment of Paper Speed at Transfer .
• Based on the output, decrease Adjustment of Paper Speed at Transfer in increments of
0.05%. After every increment adjustment run test prints and evaluate the output to
determine if additional adjustment is necessary.
314 Xerox ® Versant ® 4100 Press
User Documentation
Troubleshooting