Xerox Versant 4100 Press, User Documentation

Page: 218 / 430

Booklet Example
The following illustration shows two different booklet types:
1. This booklet is not square-folded; it has a rounded, thicker appearance to the spine.
2. This booklet is square-folded; the booklet spine is flattened and squared, giving a perfect-bound
book appearance.
Trim Feature
Access the trim feature from your computer print driver or from the print server.
Trim Options
When using the trim options, always consider the following:
• Booklets exiting the SquareFold ® Trimmer device can contain trim remnants or scraps from the
previously trimmed booklet. Static electricity causes this build-up and it is normal. If booklets
contain trim remnants, simply remove and discard them.
• The trim feature can be switched on or off. When the feature is on, you can adjust the trim setting
in 0.1 mm (0.0039 in.) increments depending on your requirements for the finished booklet job.
The trim options include the following:
• Trimming On/Off : Switch On / Off the Trimming feature. The default setting is Off .
• Cut to Size : Use the Left/Right Arrow buttons to decrease or increase the trimmer setting.
Adjustments are made in 0.1 mm (0.0039 in.) increments.
The trim setting is based on:
• The number of sheets in the finished booklet
• The finished booklet width size
• The media type (coated or uncoated)
• The media weight
Note: Experiment with various settings to determine the best selections for your job. You may
want to run one or more test prints before running larger jobs for best booklet output.
218 Xerox ® Versant ® 4100 Press
User Documentation
Working With