Xerox Versant 4100 Press User Documentation Download

Page: 274 / 430

2. To display more information about supplies and their status, touch the

Information

button.

The

Supplies

screen appears.

3. From the menu, select

Other Consumables

to see the status of other consumables.

The

Other Consumables

window appears and provides information about the percentage of

remaining life for each consumable.

4. Use the up and down arrows to see additional consumables, such as the finisher staples, the

staple waste container, and other consumables for any additional optional devices that are
configured with the press.

Replacing the Basic Staple Cartridge for Side Stitching

Note:

Ensure that the press is not running before performing this procedure.

274

Xerox

Versant

4100 Press

User Documentation

Working With

Summary of Contents for Versant 4100 Press















































































































































































































































































































































































































































Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands

Xerox Versant 4100 Press, User Documentation

Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands