Xerox Versant 4100 Press User Documentation Download

Page: 114 / 430

The

Stock Library

list displays stocks that are specific to the press. The user selects a stock from

the list, and that stock is assigned to the tray. For more information, refer to

Accessing the Stock

Library from Tray Properties

The

Tray Stock Properties

window includes the following settings:

Enable Tray

Permits the selected tray to be used.

Disable Tray

Prohibits the selected tray from being used.

Long Edge Feed

Indicates that the paper in the tray is loaded in the Long Edge Feed (LEF) direction.

Short Edge Feed

Indicates that the paper in the tray is loaded in the Short Edge Feed (SEF) direction.

Alignment Profile

Allows the user to select the system default profile or a specific profile that was created and saved
from the

Profiles

feature. Select one of the following:

•

Apply to stock

: This option uses a specific alignment profile for the stock. This option does not

apply the profile to the tray.

Note:

This is the system default option.

•

Apply to tray

: This option uses a specific alignment profile for the tray only and not the stock

loaded in it. The

Apply to tray

field shows either

Default Profile

or a selected profile.

•

Select Profile

: Select this option to open the

Select Alignment Profile

window and choose a

previously saved profile that can be applied to the selected tray.

For detailed information and instructions, refer to

Alignment Profiles

Override

• If the Override checkbox is cleared, when the current media loaded in the tray does not match

the media information on the

Tray Stock Properties

window, a message appears.. Load the

tray with the same media that is indicated on the

Tray Stock Properties

window.

• If the check box is selected, when there is a media mismatch between the actual tray contents

and the information shown on the

Tray Stock Properties

window for that tray, a message

never appears.

Cancel

Select this option to close the

Tray Stock Properties

window without making any changes.

Select this option to save any changes made and close the

Tray Stock Properties

window.

Acccceessssiinngg TTrraayy PPrrooppeerrttiieess

1. Select a tray from the PredictPrint Media Manager main window.

The

Tray Stock Properties

window opens.

114

Xerox

Versant

4100 Press

User Documentation

Working With

Summary of Contents for Versant 4100 Press















































































































































































































































































































































































































































Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands

Xerox Versant 4100 Press, User Documentation

Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands