Xerox Versant 4100 Press, User Documentation

Page: 115 / 430

2. To close the
Tray Stock Properties
window, select either OK or Cancel .
The PredictPrint Media Manager main window appears.
A Alliiggnnm meenntt PPrrooffiillee LLiibbrraarryy
The
Alignment Profile Library
is populated with all the saved alignment profiles for the system. A
user can select a desired profile to use at point of need.
The
Alignment Profile Library
can be accessed from Tray Properties and from Advanced Stock
Setup .
Note: Alignment profiles cannot be created or edited from the library. To create or edit profiles,
from the PredictPrint Media Manager main window, select Profiles
→
Alignment Profile .
M Maattcchhiinngg tthhee TTrraayy aanndd SSttoocckk IInnffoorrm maattiioonn
Important: To ensure maximum productivity and successful job completion, always verify that
the Tray Properties information on the PredictPrint Media Manager application on the print
server matches the actual stock or media that is loaded in the tray being used for the print job.
Before running a print job, check for any of the following conditions:
• Modifications were made to the Stock Library, such as:
– Adding a stock
– Copying a stock
– Creating a new stock
– Editing an existing stock
• Stock or media was loaded into the selected tray for the print job
• The tray selected for the print job was opened or closed
Note: If any of these conditions apply, verify that the Tray Properties information matches the
actual tray contents.
If the stock loaded in the tray does not match the information on the Tray Properties window, then a
message may appear on one or more of the following screens:
• The press User Interface
• The PredictPrint Media Manager application
• The print server
Tip: Stock or tray mismatch information and how it is displayed is dependent on the individual
print server. If stock is changed in a tray, a message may not be displayed. Therefore it is
important to perform the following steps always before running a print job.
1. Check for a tray mismatch message on the press User Interface. If a mismatch message is
displayed, select it.
A new message displays and explains what media is required and the tray location.
Xerox ® Versant ® 4100 Press
User Documentation
115
Working With