Xerox Versant 4100 Press User Documentation Download Page 213

Page: 213 / 430

SSqquuaarreeFFoolldd

TTrriim

meerr D

Deevviiccee

Note:

This optional finishing device requires the Interface Decurler Module.

Tip:

SquareFold

Trimmer device is available only with booklet maker finisher.

The SquareFold

Trimmer device is an optional finishing device that flattens the spine of a booklet

and performs face trim of the booklet.

The SquareFold

Trimmer device:

• Receives the booklet from the booklet maker area of the finisher.

• Flattens the booklet spine, thereby reducing the booklet thickness and giving it the appearance of

a perfect-bound book.

• Trims and cuts away the face edge of the booklet, resulting in a neat finished edge.

The booklet is assembled and stapled in the booklet area of the finisher. The booklet then enters the
SquareFold

Trimmer device already assembled. Any adjustments to the image of the original and its

placement on the booklet page must be set at the print server.

SSqquuaarreeFFoolldd

TTrriim

meerr C

Coom

mppoonneennttss

Xerox

Versant

4100 Press

User Documentation

213

Working With

Summary of Contents for Versant 4100 Press















































































































































































































































































































































































































































Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands

Xerox Versant 4100 Press, User Documentation

Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands