Xerox Versant 4100 Press User Documentation Download Page 150

Page: 150 / 430

If you use the

Trim

settings, ensure that

is selected for the

Test Print Trim

option.

Select the

Start

button.

Obtain the printed samples from the output area of the press.

Measure the sample output and record the bi-fold position on a sheet of paper.

Select the correct the bi-fold position for the multiple sheets option.

Repeat the previous steps until the desired output is achieved.

15. When desired output is achieved, select

to save and close the

Fold Adjustment Profile

Note:

After multiple attempts, if acceptable output cannot be achieved, select

to save

and close the profile. For further assistance, contact the Customer Support Center.

Bi-Fold Multiple Sheets Stapled Adjustment Procedure

Note:

The Bi-Fold Multiple Sheets Stapled Adjustment feature is available with an optional

finisher with a booklet maker.

1. From the PredictPrint Media Manager main window, select

Profiles

The

Profiles

window appears.

2. Select the

Fold Adjustment

tab.

The

Fold Adjustment

option appears.

3. Select either the

New

Edit

button.

If you are editing an existing fold adjustment, select the desired profile from the list and then
select the

Edit

button.

The

[New or Existing] Profile Properties

window opens.

4. Type in a new name, or if desired, edit the existing name.

It is recommend that you use a name such as

Single Fold Plain

or something that indicates

the fold type.

5. From the drop-down menu, select the

Bi-Fold Multiple Sheets Stapled

Fold Type

6. Select desired settings such as

Size

Coating

, and

Weight

7. Select the

Test Print

button.

The Fold Adjustment - Test Print window displays.

8. For the

Trim

option, ensure that

Off

is selected.

Note:

The

Trim

selection is available only when the press is connected to an optional

booklet maker finisher and an optional trimmer device.

9. Select the desired tray, and then select the

Start

button.

When the test prints complete, the

[New or Existing] Profile Properties

window reopens.

Note:

This screen varies depending on the selected Fold Type.

10. Obtain the printed samples from the output area of the press.

11. Measure the sample output and record the bi-fold position on a sheet of paper.

150

Xerox

Versant

4100 Press

User Documentation

Working With

Summary of Contents for Versant 4100 Press















































































































































































































































































































































































































































Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands

Xerox Versant 4100 Press, User Documentation

Search results

Summary of Contents for Versant 4100 Press

Reviews:

Related manuals for Versant 4100 Press

Brands by name

Popular brands