Xerox Versant 4100 Press, User Documentation

Page: 193 / 430

Number
Compo-
nent
Description
1 Paper jam
and error
indicators These indicators light when a paper jam occurs in HCS areas E1–E8.
2 Sample
button
Press this button to have the HCS deliver a sample sheet to the top tray.
The indicator to the left of the button blinks until a sample sheet is delivered to
the top tray.
3 Unload
button
Press this button to stop printing and remove paper.
4 Top tray Receives the printed output. Sample sheets also are delivered here.
Holds a maximum of 500 sheets, 330 x 488 mm (13 x 19.2 in.)
5 Circuit
breaker
switch The circuit breaker switch is located on the rear of the HCS. This switch
automatically shuts off electricity in the event of electrical failure or a short
circuit.
6 Top cover Open this cover to clear paper jams.
7 Stacker
tray / cart Collated sets (up to a total of 5000 sheets) are transported to the stacker tray,
which is located on a movable stacker cart.
8 Front door Open this door to remove paper or printed output.
9 Optional
second
HCS A second, optional HCS can be added to the system configuration for additional
output productivity.
HCS Circuit Breaker
The HCS circuit breaker is located on the rear of the HCS unit.
1. Test Button
2. On or Off Switch
The circuit breaker switch is normally in the ON position.
Note: When an electrical interruption is detected, the circuit breaker automatically switches off
to discontinue the electrical flow to the HCS. For electrical information, refer to Safety .
Xerox ® Versant ® 4100 Press
User Documentation
193
Working With