Xerox VersaLink C415, User Manual

Page: 275 / 336

PPRRO OB BLLEEM M SSO OLLU UTTIIO ON N
Vertical White Lines or Streaks - One Color
Lines or streaks appear in one color of your output.
1 Print the test pages to identify the affected color.
2 To clean the printhead lenses for the affected color,
pull out the cleaning rod until it stops, then move it
all the way in. Repeat three more times. Then
repeat this procedure for each affected color.
Note: To print procedures on resolving print-
quality problems, at the control panel, press the
H Hoom mee button, then touch D Deevviiccee >>
IInnffoorrm maattiioonn PPaaggeess >> TTrroouubblleesshhoooottiinngg PPrriinntt
Q Quuaalliittyy PPaaggee >> PPrriinntt.
Toner Missing or Easy to Rub Off
Toner appears to be missing from the print or is easy to
rub off.
1 Verify that the paper you are using is the correct
type for the printer and is loaded properly. For
details, see
Supported Paper .
2 At the control panel, select a heavier paper.
Note: Papers from lightest to heaviest are:
• For uncoated paper: Plain, Lightweight
Cardstock, Cardstock, and Heavyweight
Cardstock
• For coated paper: Lightweight Glossy
Cardstock, Glossy Cardstock, and
Heavyweight Glossy Cardstock.
C O P Y A N D S C A N P R OB L E M S
Your printer is designed to produce consistently high-quality scans and copies. If you observe quality problems, use
the information in this section to troubleshoot the problem. For more information, go to
www.xerox.com/office/
VLC415support .
W Waarrnniinngg::
The Xerox Warranty or Service Agreement does not cover damage caused by using
unsupported paper or specialty media. For more information, contact your local Xerox representative.
Copy and Scan Problems and Solutions
If the copy or scan quality is poor, refer to the following table:
SSYYM MPPTTO OM MSS SSO OLLU UTTIIO ON NSS
Lines or streaks only present in copies made from the
document feeder. There is debris on the document glass. When scanning,
the paper from the document feeder passes over the
debris, which creates lines or streaks. Clean all glass
surfaces with a lint-free cloth.
Spots present in copies made from the document glass. There is debris on the document glass. When scanning,
the debris creates a spot on the image. Clean all glass
Xerox
®
VersaLink
®
C415 Color Multifunction Printer User Guide
275
Troubleshooting