Paper and Media
172
Xerox
®
AltaLink
®
B80XX Series Multifunction Printer
User Guide
9.
At the control panel, select the correct paper size, type, and color.
−
To select a new paper size, touch
Size
.
−
To select a new paper type, touch
Type
. For letterhead paper, select
Letterhead
. For pre-
printed paper, select
Pre-Printed
. For hole-punched paper, select
Hole Punched
. For index or
covers, select
Cardstock
.
−
To select a new paper color, touch
Color
.
10.
To confirm the settings, touch
Confirm
.
Note:
To change the paper settings when the tray is set to Dedicated mode, refer to Configuring
Tray Settings on page 167.
Adjusting the Paper Guides in Trays 1 and 2
You can adjust the guides in Trays 1 and 2 to accommodate standard or custom paper size papers.
In the standard position, the guides move into the supported standard paper settings. In the custom
position, the guides move in 1-mm (0.04 in.) increments.
To move the paper guides from the standard to the custom paper size position:
1.
Pull out the tray until it stops.
2.
To expand the length or width paper guide, release the guide lock, then slide out the length or width
paper guide until it stops.