Getting Started
52
Xerox
®
AltaLink
®
B80XX Series Multifunction Printer
User Guide
7.
To change enablement settings, for Enablement, select options as needed.
8.
Click
Register Printer
. The Google Cloud Print Service page reappears with a link that allows you to
complete the device registration.
Note:
If printer registration does not continue, to troubleshoot the problem, refer to the
System
Administrator Guide
www.xerox.com/office/ALB80XXdocs
9.
Within 15 minutes, click the link for
Enabled - Finish device registration
. The Google Cloud Print
Printer confirmation page opens in a new browser tab.
Notes:
•
If prompted, log in to your Google account.
•
If you do not click the link within 15 minutes, begin the registration process again.
10.
Click
Finish printer registration
. A message confirms that the printer is registered. The Cloud Printer
is now ready to print.
11.
To access the Google Cloud Print feature, in your Google account, click
Manage Your Printer
.
Note:
The default printer name appears in this format: Model name (MAC address).
For additional information about Google Cloud Print configuration and settings, refer to the
System
Administrator Guide
www.xerox.com/office/ALB80XXdocs
Connecting to a Telephone Line
If an optional fax kit has been installed, connect the telephone line to enable and configure the fax
settings.
Note:
One-line or two-line fax kits are available. To enable fax functions, install the fax card provided
with the kit, using the installation instructions provided.
WARNING:
To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or
larger telecommunication line cord.
1.
Ensure that the printer is powered off.
2.
Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port on
the back of the printer.
3.
Connect the other end of the RJ11 cable to an operating telephone line.
4.
Power on the printer.
5.
Enable and configure the Fax functions.