Xante Accel-a-Graphix CT4, User Manual

Page: 83 / 310

___________________________________________ PC Setup 4-7
Windows Setup
XANTÉ provides an Adobe PostScript Level 2 driver for use with
the controller. This driver with the PPD is on the DOS XANTÉ
Utilities disk.
Note: The Adobe Windows driver includes a font downloader
under Printer Setup. The downloader is installed
automatically with the Windows driver.
The driver file with the PPD file allows you to select printer
functions while using Windows applications. For details on these
routine procedures in Windows, see the Adobe PostScript Printer
Driver User’s Guide. This section explains how to print the User’s
Guide, how to install and setup the driver for Windows 3.1 or 3.11,
and how to perform the automatic installation and setup of the driver
for Windows 95.
Printing the Windows Driver Guide
The following procedure explains how to print the Adobe PostScript
Printer Driver User’s Guide for Windows 3.1 and 3.11. If you have
Windows 95, refer to the Help file in the Driver application.
1. Turn on your PC and go to the DOS prompt.
2. Place the Adobe Windows PostScript Printer Driver disk into
drive A.
3. Type the following command (substituting the name of the
port you are using for LPT1 if necessary).
COPY A:\USERGUID.PS LPT1
↵
After the file downloads the following message appears.
1 FILE(S) COPIED